A new MSC series of low profile choke cores for small inductors is an ideal choice for mobie devices, miniature DC/DC converters, cell phones, laptops, adapters, car electronics and so on.
MSC series toroidal cores are made of thin (25 microns) Fe-based amorphous ribbon and due to their high saturation induction (1.5 T) have a higher inductance rate and the opportunity to operate with a high bias current. Distributed gap, obtained through a special thermomagnetic treatment regime, helps to reduce losses and cost, and to increase technological effectiveness.
Chokes, based on MSCcores series have smaller number of winding turnsand respectively,lower wire loss and better opportunities in DC bias as compared to conventional soft magnetic materials: ferrites, magnetodielectrics andpermalloys.
CONFIGURATION:
Ribbon wound magnetic core is placed into hard protective container of aluminum alloy and mechanically fixed with silicone sealant.The container has rounded edges and is designed for direct winding of a thick wire. The container provides reliable mechanical protection and preservation of amorphous material's properties. All materials comply with UL94V-1 / 0.
KEY FEATURES OF THE AMORPHOUS MATERIAL:
- Ribbon thickness 25 +- 5 microns
- Induction amplitude, Bm(25°C) 1.5 T
- Curie temperature, Tc 420°C
- Crystallization temperature 530°C
- Operating temperature range -60°C ... +125°C
- Density 7.3 g/cm3
ADVANTAGES:
- Good interference suppressing ability
- Extremely small size: the possibility of high-density mounting
- Low core loss
- Low coil loss
- Low-profile SMD and THD-type construction
- High mechanical durability
ENTRY EXAMPLE:
MS C 05 10, where:
- MS – MSTATOR;
- C – application (choke);
- 05 – outer diameter in mm;
- 10 – height (1.0 mm)
APPLICATION:
- DC/DC converters
- AC/DC converters in adapters for mobile chargers
- DC/DC converters in cell phones
- Small output chokes (inductors) in DC/DC converters
- Laptop DC/DC converters
- Single- and multichannel module DC/DC converters
- PWM and PFM hybrid integrated circuits of below 10W class
- Various chargers
- Small automotive devices
DIMENSIONS AND KEY FEATURES:
| TYPE |
Dimensions in container1) (without a container) (mm) |
Mean line length Lm, mm |
Cross-section Ac, mm2 |
Winding window area W a (mm2) |
Inductance AL2) (μH/turn2) |
Magnetic permeability μ |
Max. magneto-motive force DCB3) (A*turn) |
|---|---|---|---|---|---|---|---|
| Nominal | Nominal | Nominal | Nominal | ±20% | Nominal | Max. | |
| MSC0510 | 4.7-1.9-1.4 (4.3-2.3-1) |
10.40 | 0.85 | 2.83 | 0.026 | 245 | 29.1 |
| MSC0620 | 6.4-2.6-2.4 (6.0-3.0-2.0) |
14.13 | 2.55 | 5.30 | 0.058 | 245 | 39.6 |
| MSC0715 | 6.8-2.6-1.9 (6.4-3.0-1.5) |
14.70 | 2.17 | 5.30 | 0.047 | 245 | 41.1 |
| MSС0725 | 6.9-2.5-3.0 (6.4-3.0-2.5) |
14.70 | 3.61 | 4.90 | 0.079 | 245 | 41.1 |
| MSC0815 | 8.4-3.6-1.9 (8.0-4.0-1.5) |
18.80 | 2.55 | 10.20 | 0.043 | 245 | 52.6 |
| MSC0830 | 8.5-3.5-3.5 (8.0-4.0-3.0) |
18.80 | 5.10 | 9.60 | 0.058 | 245 | 52.6 |
| MSC1020 | 10.7-4.3-2.5 (10.0-5.0-2.0) |
23.50 | 4.25 | 14.50 | 0.058 | 245 | 65.8 |
| MSC1030 | 10.8-4.3-3.6 (10.0-5.0-3.0) |
23.50 | 6.48 | 14.10 | 0.087 | 245 | 65.8 |
| MSC0945 | 10.3-3.2-4.9 (9.5-4.0-4.5) |
21.20 | 9.82 | 8.04 | 0.120 | 245 | 59.3 |
- outer diameter – inner diameter - height
- @ F=100 kHz, Urms=1 V, T=25°C
- The limiting value of the magnetomotive force, defined as the product of the DC bias on the number of winding turns, at which the inductance factor AL is at least 60% of its initial value.
- Operating temperature range -60°C ... +125°C
ADDITIONAL PARAMETERS AND CHARACTERISTICS:
